25 of Vertiface Fabric Wall and Screen Covering GRANNY SMITH 133x100cm Grn05

$1,020.00
In Stock


Calculate Shipping

25 of Vertiface Fabric Wall and Screen Covering GRANNY SMITH 133x100cm Grn05


We list most items several times. Items listed with a FREEPOST prefix may offer the best deal for single items. Other listings may offer the best combined postage rate. This helps you keep your shipping costs as low as possible.

BULKY items are shipped by courier. To help keep your courier costs down, some items ship from several locations. Items listed with an xSYD prefix ship from SYDNEY; with xMEL, ship from MELBOURNE, etc.

Vertiface Fabric Wall and Screen Covering GRANNY SMITH

Redefine your environment with premium acoustic solutions from Autex® . Vertiface® is a top-quality wall fabric that allows designers to create a warm and inviting space that can still stand up to the rigorous wear of education and commercial use.

Available in a range of 38 exciting colours, you can add personality to your environment. Vertiface® comes in a roll form and can be stuck directly onto any wall surface, along with screens, partitions and notice boards. Its non-woven non-fray structure gives designers scope to create unique decorative borders and cut-in designs.

Use alone as a wallcovering or combine with Autex Interior Acoustic products for a high performing, sound absorbing solution. Decorative and functional acoustic wallcovering for education, commercial offices, theatres, libraries, retail and hospitality sectors.

Manufactured using a minimum of 90% post-consumer recycled material. Vertiface® is made from 100% polyester and is moisture resistant so that it won t stain, rot or break down.

A wallcovering that can be used for a wide range of applications; Vertiface® is a decorative fabric that provides the freedom to create functional, stylish and unique interiors. Available in a range of over 35 exciting colours, you can create logos, custom cut designs and add unique personality to your environment.

Vertiface® is an extremely durable, non-woven fabric that will not zip or fray and has a hook-and-loop receptive surface; making it ideal for use in a wide range of situations. From education, retail and commercial interiors to office partitioning and pinboards, Vertiface® can provide a vibrant and exciting addition to any space.

Boasting UV stable, long lasting colour; Vertiface® is made from 100% polyester and is moisture resistant so that it will not stain, rot or break down. Because Vertiface® is non-toxic, non-allergenic, non-irritant, recyclable and environmentally friendly. It is a safe and reliable choice for wallcoverings. Combined with Autex s range of Interior Acoustic products, Vertiface® creates a functional feature that absorbs reverberated noise and echo in building interiors. Redefine your environment with Autex Vertiface® .

Small samples are available at a nominal cost to cover postage. Please search this site for "SAMPLE; Grn05 Vertiface Fabric Covering"

By searching this site for 'Grn05' you can find all the AUTEX products available in this colour. These are summarised in the Product table provided below.

The full range of colours in the GREEN PALETTE are: Grn01 (Avocado), Grn02 (Jade), Grn03 (Lime), Grn04 (Wasabi), Grn05 (Granny Smith).

When purchasing this item you will receive

  • Roll(s) of the lineal meters (Lm) purchased e.g. Order Qty = 1 will buy 25 Lm

This item is available in the following colours

  • Granny Smith

 

 
Feature Comment
* Quality Premium
* Style By the roll
* Suits Apartment, education, retail and commercial interiors to office partioning and pin boards.
Item Colour Granny Smith

 

 

 
Feature Comment
Minimum Order Quantity 2 linear meters per colour
Roll Capacity 50 linear meters
Roll Width 1.3 meters (130 cm)
Suitable for Retail spaces
Suitable for Residential and apartments
Suitable for Recording Studios and Radio
Suitable for Theatres, Home Cinema and Auditoriums
Suitable for Education, Hospitality and Healthcare
Suitable for Commercial and/or Office Space

 

 

 
Feature Comment
Acoustic Treatment Quietspace Acoustic products have been specially developed by Autex as a contemporary wall fabric that would also reduce reverberated noise in building interiors.
Acoustic Treatment Note: Cycle of Knowledge has no sound engineering expertise, and offers advice and recommendations based on information provided by Autex.
Acoustic Treatment Quietspace Acoustic products are composed of a Vertiface soft non-woven polyester fabric upper, heat-bonded to a polyester backing at least 10mm thick.
Acoustic Treatment REVERBERATION is defined as 'the combined effect of multiple sound reflections within a room'. It is measured by the Noise Reduction Coeffiecient (NRC).
Acoustic Treatment To address the TRANSMISSION of sound through walls, AUTEX recommends the use of Quietspace Acoustic products in combination with Quietstuff Acoustic Insulation (sold seperately).
Acoustic Treatment TRANSMISSION of sound through walls can be reduced by introducing an air gap behind the Quietspace Acoustic products or by modifying ceilings and walls with QuietStuf products.
Acoustic Treatment TRANSMISSION of sound through walls is best addressed at the time of comstruction. Special wall and ceiling treatments assist in minimising sound transmission.
Acoustic Treatment While the acoustic properties vary across the range, the Quietspace Acoustic products typically absorb REVERBERATED noise (echo) by around 40%, improving privacy, comfort and productivity.
Acoustic Treatment Where walls and ceilings can not be modified the Quietspace Acoustic products can address the source and receiving rooms so that noise levels are reduced.
Acoustic Treatment Note: Cycle of Knowledge Innovative Solutions and Autex recommend you engage a professional sound engineer/ acoustic specialist to assist your decision making processes.
Application Usually applied to walls with high tack glue. Sold seperately, the glue is available in DIY spray cans or professional canisters.
Colour Palette (Blacks) Koala (BLA01), Silver (BLA02), Charcoal (BLA03), Noir (BLA04)
Colour Palette (Blues) Spearmint (BLU01), Sage (Blu02), Azure (BLU03), Octane (BLU04), Stately (BLU05), Ink (BLU06), Stonewash (BLU07), Atlantis (BLU08), Electric Blue (BLU09)
Colour Palette (Browns) Lightsout (BRN01), Bark (BRN02), Fawn (BRN03), Sanz (BRN04)
Colour Palette (Greens) Avocado (GRN01), Jade (GRN02), Lime (GRN03), Wasabi (GRN04), Granny Smith (GRN05)
Colour Palette (Purples) Calypso (PUR01), Blush (PUR02), Phantom (PUR03), Cinder (PUR04)
Colour Palette (Reds) Raspberry (RED01), Theatre (RED02), Chilli Red (RED03), Blazing Red (RED04), Vintage (RED05)
Colour Palette (Whites) Porcelain (WHI01), Myst (WHI02), Civic (WHI03)
Colour Palette (Yellows) Citrus (YEL01), Clay (YEL02), Simba (ORA01), Brilliant Orange (ORA02)
Colour Palette Explained To simplify product searches and colour matching each VERTIFACE colour has been assigned a code (e.g. BLA04 = Noir). A search for BLA04 will show the full range of products available in this colour (e.g. wall tiles, semi-rigid panels, ceiling tiles, etc.)
Ease of Cutting Always cut using a sharp utility knife.
Ease of Handling Vertiface has a pile: ensure the pile is running in the same direction to avoid colour variation; or use the pile to creat a 'checkerboard' effect.
Ease of Handling Vertiface should be hung from the top down, smoothing from the centre.
Hook and Loop Receptive Surface Yes. We do not recommend using a hoop profile breater than 1.5mm
Images While the images shown are actual Vertiface wall fabric installations, they may not show the colour being advertised. The images are intended to show possible combinations and varying uses of the product.
In Stock Yes, our supplier advises this item is in stock
Made-to-order Manufacture This product is normally in stock and cut to your required length.
Made-to-order Returns Once cut the manufacturer is reluctant to accept returns. Please refer to the Warranty for additional information.
Material Thickness 3 to 4 mm
Material Thickness 400gsm, about the same thickness as five A4 sheets of paper
Next Day Ship This item requires up to 5 days for scheduling, cutting and dispatch preparation.
Non-Allergenic The manufacturer (Autex Industries) asserts 'There are no known health hazards relating to handling, use or exposure to thermally bonded polyester insulation materials manufactured by Autex.'
Non-Toxic Polyester is classed as no more toxic than wood under the state of New York Article 15 part 1120. Polyester is pH 7.8 (where pH 7.0 is neutral), resistant to biological, bacterial or vermin attack.
Product Description 100% polyester needle punched, thermally bonded wallcovering.
Product Name Vertiface
ReStocking Fee Once cut, returns for this product are not normally accepted. Please refer to the Warranty for additional information.
Samples Available Samples for this product are available on request. A small fee is charged to cover return postage as the samples are expensive and reuseable.
Suitable as a Pin Board This product is suitable for use as pinboards, hook-and-loop receptive surface, acoustic wallcoverings. The product also accepts pins and staples.

 

 

                               

The AUTEX product range includes:
Brand Colours Format Dimensions Comment
Vertiface® 38 Colours: Codes are>
GRN01-5, BLU01-9, PUR01-4,
RED01-5, BRN01-4, YEL01-2,
ORA01-2, WHI01-3, BLA01-4
Roll 1.3m wide
Min 2m long
Max 50m long
Decorative and functional acoustic wallcovering for education, commercial offices, theatres, libraries, retail and hospitality sectors
Composition® 38 Colours: Codes are>
GRN01-5, BLU01-9, PUR01-4,
RED01-5, BRN01-4, YEL01-2,
ORA01-2, WHI01-3, BLA01-4
Roll 1.22m wide
Min 5m long
Max 25m long
Decorative and functional acoustic wallcovering for education, commercial offices, theatres, libraries, retail and hospitality sectors
Acoustic Fabric™ Peel 'n' Stick Tiles 38 Colours: Codes are>
GRN01-5, BLU01-9, PUR01-4,
RED01-5, BRN01-4, YEL01-2,
ORA01-2, WHI01-3, BLA01-4
Wall Tiles Each tile:
60cm wide
60cm high

6 tiles per pack
Transform your walls into acoustic notice boards by taking advantage of pinnable and hook-and-loop receptive surface
Symphony™ 26 Colours: Codes are>
GRN01,2,4,5, BLU02-5,7,9, PUR02-4,
RED01,3,4, BRN01-3, YEL01,
ORA01, WHI03, BLA01-4
Roll 1.22m wide
Min 5m long
Max 25m long
Suited to the Tertiary and Secondary education sectors, commercial offices, theatres, libraries, retail and the hospitality industry. Apply Symphony™ as a simple yet sophisticated high-end solution to controlling noise in interior environments
Workstation™ 15 Colours: Codes are>
GRN01,5, BLU05,7,9, PUR02,
RED04, BRN02,3, ORA02,
WHI01,3, BLA02-4,
Plus Nude White,
Nude Black
Sheet ~120cm wide
~241cm long
Thickness
6mm, 12mm
Single or Double sided
Can be used in wide array of commercial applications, including office dividers and partitions, sustainable furniture and as a creative medium for sound absorbing feature pieces
Cove™ 14 Colours: Codes are>
GRN11,12, BLU11,12, RED11,
BRN11, YEL11, ORA11,
WHI11-13, BLA11-13
Sheet 1195mm wide
595mm long

8 per box
Made from Autex Cube. A lightweight, semi-rigid and pin-receptive acoustic panel, Cove promotes a personalised and acoustically balanced workspace without interruption to a collaborative environment. Allowing for an infinite number of configurations, Autex Cove can be adjusted and moved to suit the dynamic requirements of a fast paced modern office.
Quietspace® Panel 15 Colours: Codes are>
GRN01,5, BLU05,7,9, PUR02,
RED04, BRN02,3, ORA02,
WHI01,3, BLA02-4,
Plus Nude White,
Nude Black
Sheet ~120cm wide
~241cm long
Thickness
25mm, 50mm,
75mm, 100mm
An ideal alternative to fabric wrapped frames, Quietspace® Panel is light-weight, semi-rigid, impact resistant and incredibly durable.
Cube™ 14 Colours: Codes are>
GRN11,12, BLU11,12, RED11,
BRN11, YEL11, ORA11,
WHI11-13, BLA11-13
Sheet ~120cm wide
~241cm long
or
~272cm long

Thickness
6mm, 12mm,
24mm
A lightweight and semi-rigid panel that has sound absorbing properties. Designed with solid colour throughout, Cube can be used in a large array of spatial design and interior solutions without the need for edging strips.
Quietspace® Frontier™ 14 Colours: Codes are>
GRN11,12, BLU11,12, RED11,
BRN11, YEL11, ORA11,
WHI11-13, BLA11-13
Modular 8 Fins
2.4m long

Thickness
12mm, 24mm
An exclusive patented design, Quietspace® is a one-of-a-kind complete modular acoustic system for superior targeted sound absorption. Create a unique acoustics ceiling feature.
Quietspace® Horizon 2 Colours: Codes are>
White or Black
Sheet 1.2m wide
1.2m long
2 per box
or
2.4m wide
1.2m long
1 per box
Thickness
50mm
Exclusive patented design, Quietspace® Frontier is a one-of-a-kind complete modular acoustic system for superior targeted sound absorption. Create a unique acoustics ceiling feature.
Quietspace® Lattice 14 Colours: Codes are>
GRN11,12, BLU11,12, RED11,
BRN11, YEL11, ORA11,
WHI11-13, BLA11-13
Modular 3 shapes
Varying sizes
An exclusive patented design, available in a range of colours and designs, Quietspace® Lattice is a modern and aesthetically pleasing approach to interior acoustics.
Quietspace® Accent Ceiling Tiles 12 Colours: Codes are>
GRN11,12, BLU11,12, RED11,
BRN11, YEL11, ORA11,
WHI11,12, BLA11,12
Ceiling Tiles 1195mm wide
595mm long

8 per box
Quietspace® Accent Ceiling Tiles are extremely durable and will not chip, crack or break, resulting in no wastage whilst installing. They have the added benefit of a smooth, classic white face combined with one of the exciting range of Autex Cube.
Quietspace® Ceiling Tiles 1 Colours: Code is>
White
Ceiling Tiles Flat
595mm wide
595mm long
or
1195mm long

Rebated
or
295mmwide
or
595mm wide
595mm long
or
1195mm long
High performing acoustic ceiling tiles for sound control in commercial and education spaces, perfect for open-plan areas. Available in two styles: Square Edge for a subtle aesthetic and Rebated Edge for a strong and defined ceiling pattern.
Quietspace® 3D Tiles 15 Colours: Codes are>
GRN01,5, BLU05,7,9, PUR02,
RED04, BRN02,3, ORA02,
WHI01,3, BLA02-4
Wall Tiles 575mm wide
575mm long
6 tiles per pack
or
595mm wide
595mm long
8 tiles per pack
High performing acoustic ceiling tiles for sound control in commercial and education spaces, perfect for open-plan areas. Available in two styles, Square Edge for a subtle aesthetic and Rebated Edge for a strong and defined ceiling pattern. 3D Tiles are lightweight and easy to install.
Quietspace® 3D Ceiling Tiles 15 Colours: Codes are>
GRN01,5, BLU05,7,9, PUR02,
RED04, BRN02,3, ORA02,
WHI01,3, BLA02-4
Ceiling Tiles 575mm square
or
595mm square

Depth of
58mm, 60mm,
80mm or 140mm
Vibrant and visually appealing 3-dimensional ceiling tile that maintains acoustic balance for retail, hospitality and commercial interiors

(AUT-VFV-133-Grn05-X25)

General Terms and Conditions

Cycle of Knowledge Innovative Solutions Pty Ltd ("the RETAILER") advises the following Terms and Conditions apply:

By purchasing this product you are acknowledging the MANUFACTURER is responsible for provision of a fit-for-purpose product, the RETAILER is reponsible for the safe transport of the product to the shipping address as advised by you, and you, the PURCHASER, are responsible for the safe storage and subsequent installation and usage of the product.

Combined Shipping Charges

We always combine shipping for multiple items.

Shipping Quotes

The cheapest shipping rate we can obtain is automatically added at checkout. You can contact us for a quote if you wish, or you can cancel your order during the checkout process if you are unhappy with the shipping charge.

IF YOU PLACE AN ORDER BUT CAN NOT PAY it is likely the automated quote has not been received from the shipping company's system. We sincerely apologise for the inconvenience this may cause. AS SOON AS WE SEE YOUR ORDER we will add the freight cost and advise you so you can pay.

Shipping and Delivery

We try very hard to ship your item on the first business day after payment has been received.

Australian public holidays may or may not be national holidays. We are based in Victoria and abide by Victorian public holidays. Few postal or courier services are available on these days. This product ships from Victoria.

This MANUFACTURER closes between early December and early January for plant maintenance. We are able to accept orders over this period but are unable to ship until the MANUFACTURER returns in early January.

Large and/or heavy items require courier delivery. Couriers typically require an extra day for booking and scheduling of the pickup. Couriers are unable to deliver to AusPost PO Boxes.

All items are shipped with tracking enabled. To facilitate the fastest possible delivery of your items we use a number of shipping systems. Unfortunately not all these systems have an automated method for providing the tracking information to you, our customer. Tracking details are usually advised. If this does not occur then they are always available on request.

SHOULD YOU HAVE ANY CONCERNS ABOUT THE SHIPMENT OR DELIVERY OF YOUR ITEM please contact us first and allow us to initiate a quick check of where your item is. 95% of all concerns can be addressed this way. Some concerns are more complex and may take a little longer.

Collection

Some items are available for collection. For these items, collection is clearly noted in the item description. Please see below for locations and pickup times.

Please send us a quick note indicating you wish to collect. This helps us to watch for your order. 98% of parcels are posted.

If you wish, you can use your own courier to collect your items. We will provide you with the shipping dimensions, the pickup address, and the access times. You will need to provide us with the shipping manifest to be attached to the items.

Payment is required prior to collection. Cash payment (COD) is not available. Once payment has been received, and your item is in place for collection, the pickup location will be then advised.

Occassionally items that can be collected, are incorrectly listed as 'must be shipped', and require you to pay for postage. We apologise for this.

If you PAY for both the item and the applied postage, we will fully refund the postage. This will happen shortly after your item is in place and ready for collection.

If you want to ONLY PAY for the item and not the postage, please place your order BUT DO NOT PAY. When we see your order we will remove the postage and resend the invoice. Your will then be able to pay for the item only.

OVERSEAS CLIENTS

Departure Point

This item is EXPORTED from Australia.

Import Custom Duties and Fees

The onus lies with you, the Purchaser, to ensure all import requirements are fully met for the delivery destination you have provided. Should any Customs charges and/or Import duties be incurred and be payable prior to receipt of your item, payment of these charges is solely your responsibility.

To the best of our knowledge, there are no additional Customs charges or Import duties for small quantities of this item imported to Australia's major trading partners. Larger quantities may be considered commercial in nature and may attract additional charges before being released from Customs.

TERMS and CONDITIONS (Manufacturer) - Vertiface®

This item can be collected, by arrangement, from NORTH BOX HILL, MELBOURNE, Australia

The exact address will be advised after the items are in place and ready for your collection. Your items will be stored securely until collected. When you are advised of the pickup address, please present at the Reception desk. Reception is open Monday to Friday 9am to 5pm and Saturday 9am to 2pm. This collection location is closed on Public Holidays.

DISPATCH SCHEDULES for MADE-To-ORDER Items.

This item is a MADE-TO-ORDER item.

Made-to-order items are manufactured as orders are received. Their manufacture occurs in Melbourne, Australia. Dispatch of manufactured items may take up to 10 days. A priority service is availabe for an additional fee.

The Supplier shuts their manufacturing plant for a major overhaul between early December and early January. Items are not manufactured or dispatched over this period.

On weeks containing public holidays the delivery schedule may vary.

To minimise delivery delays these items are shipped direct from the Australian manufacturer's Melbourne factory, to you.

USE OF IMAGES

Images are reproduced by arrangement with the Supplier for this item.

SAMPLES ARE AVAILABLE

Fabric samples for Vertiface® are available on request. If you are unsure of the colour or material please contact us and we will dispatch appropriate samples. Return of the samples is appreciated as they are expensive and are reuseable. There is a small charge to cover shipping.

RETURN OF MADE-TO-ORDER GOODS

Made-to-order items will be manufactured to meet your requirements, as stated in your order.

Made-to-order items have a limited resale value.

Due to sizing, dye lot and warehousing considerations items can not be returned if you have made a mistake or changed your mind. Unless the items are damaged on arrival, are not fit for purpose, or are not the described item you purchased, they can not be returned.

If the Items are damaged on arrival, or are not fit for purpose, or are not the described item you purchased, they will be replaced or refunded under warranty.

In some circumstances the manufacturer will consider a return of sold product, but this is solely at the discretion of the manufacturer. Where this occurs there are typically a number of deductions that will be made against the original sale price. At the manufacturer's discretion there may be a Restocking Fee (~15%) to cover costs to return the item to stock. At Cycle of Knowledge Innovative Solution Pty Ltd's discretion there may be a reduction in the offered refund in recognition that the goods are now second-hand (~25%) and will bare a warehousing cost until resold.

If the goods have been damaged in transit YOU MUST NOTE THIS on the freight documents before accepting the goods. Photos are also very beneficial in supporting the process.

The manufacturer, via Cycle of Knowledge Innovative Solutions Pty Ltd, must be advised of all damaged, faulty, or incorrectly supplier product within 7 days of delivery. So, if there is a problem please tell us asap, with photos when appropriate, so we can work through resolving the issue with you, and on your behalf.

 

The product specifications are as follow
Feature Comment
* Style By the roll
Light Reflective Values (by colour) 19.72 (White CIVIC is 57.28; Black NOIR is 1.16)

 

 

The product specifications are as follow
Feature Comment
Roll Capacity 50 linear meters
Roll Width 1.3 meters (130 cm)

 

 

The product specifications are as follow
Feature Comment
Application Usually applied to walls with high tack glue. Sold seperately, the glue is available in DIY spray cans or professional canisters.
Composition 100% polyester fibre from polyethylene terephthalate (PET). Vertiface contains a minimum of 90% recycled polyester fibre.
Ease of Cutting Always cut using a sharp utility knife.
Ease of Handling Vertiface should be hung from the top down, smoothing from the centre.
Ease of Handling Vertiface has a pile: ensure the pile is running in the same direction to avoid colour variation; or use the pile to creat a 'checkerboard' effect.
Environmental Vertiface is manufactured from 100% polyester fibres and does not contain formaldehyde binders.
Environmental Uncontaminated Vertiface can be recycled.
Environmental Off-cuts and manufacturing waste is re-used or re-cycled wherever possible.
Environmental Autex polyester fibres support safer indoor air quality and will not become a potential airborne pollutant.
Fabric Care Maintain in accordance with the Care and Maintenance Guide available for this product. The Guide can be found at www.autex.com.au/acoustics/
Fastness to Light Vertiface is suitable to indoor use only. Colour and light-fastness are dependent on use and exposure.
Fastness to Light TSL 9002: Light Fastness Rating: 6-7 (7 = highest)
Fastness to Light ISO 105-B02-1994 (Grey Scale 1-5): Light Fastness Rating: 3
Fastness to Light Colour Fastness to Rubbing: AS2001.1 4.3 / Wet 4-5 / Dry 4-5 (5=highest)
Fastness to Light Vertiface has been tested and guaranteed to perform to the following standards:
Finish Product may vary from samples and batch-to-batch due to fibre blending and lay-up which is an inherent feature of this product.
Finish Non-woven. No pattern repeat but Vertiface has a directional grain.
Fire Rating AS ISO 9705-2003 AS ISO 9705-2003; Classification: Group 1; (SMOGRArc): <100m2/s2; As required by BCA C1.10 (FI 4096 dated 11 Jul 2012)
Fire Rating ASTM E-84 Class A, FSI: 20, SD: 50 (01.04913.01.206a May 2002)
Fire Rating EN13501.1:2007+A1:2009 B - s1, d2 (WF 336910 dated 25 Feb 2014)
Fire Rating ISO 9705: 1993 Classification: Group 1-S; Smoke Production Rate: < 5.0 m2/s; As required by NZBC C/VM2
Hook and Loop Receptive Surface Yes. We do not recommend using a hoop profile breater than 1.5mm
Images While the images shown are actual Vertiface wall fabric installations, they may not show the colour being advertised. The images are intended to show possible combinations and varying uses of the product.
Installation A range of installation accessories are avalable. These include fast, drying, high tack contact, adhesive solutions and edging strips.
Installation A full set of Installation Instructions are available at www.autex.com.au/acoustics/
Made-to-order Manufacture This product is normally in stock and cut to your required length.
Made-to-order Returns Once cut the manufacturer is reluctant to accept returns. Please refer to the Warranty for additional information.
Material Thickness 3 to 4 mm
Material Thickness 400gsm, about the same thickness as five A4 sheets of paper
Moisture Absorption Polyester is not affected by moisture, mould or mildew and will not rot or deteriorate in intended use situations.
Moisture Absorption The structural integrity of Quietspace products will not be affected by moisture. Exposure of polyester fibre to an atmosphere of 50 degrees C at 90% relative humidity for four days showed moisture absorbtion by weight of less than 0.03% .
Non-Allergenic The manufacturer (Autex Industries) asserts 'There are no known health hazards relating to handling, use or exposure to thermally bonded polyester insulation materials manufactured by Autex.'
Non-Toxic Polyester is classed as no more toxic than wood under the state of New York Article 15 part 1120. Polyester is pH 7.8 (where pH 7.0 is neutral), resistant to biological, bacterial or vermin attack.
Pattern Repeat No, there is no pattern repeat in this product.
Physical Properties Solubility in Water: Not soluble
Physical Properties Relative Vapour Density: N/A
Physical Properties Explosive Limits: N/A
Physical Properties Melting Point: 230 degrees C
Physical Properties Specific Gravity: Polyester 1.38
Physical Properties Boiling Point: N/A
Physical Properties Vapour Pressure: N/A
Physical Properties Alkalinity: pH 7.8
Physical Properties Flash Point: N/A
Product Description 100% polyester needle punched, thermally bonded wallcovering.
Product Name Vertiface
ReStocking Fee Once cut, returns for this product are not normally accepted. Please refer to the Warranty for additional information.
Roll Dimensions 1.3m width x 2m (minimum); x 50m (maximum) length
Suitable as a Pin Board This product is suitable for use as pinboards, hook-and-loop receptive surface, acoustic wallcoverings. The product also accepts pins and staples.
VOC Emissions Autex polyester has been tested by Cetec Pty Ltd (Report: CV080408) for chemical emission and is classified as low VOC: VOC concentration: 0.01 mg/m3
Warning ! Check the product for manufacturing faults prior to installation.
Warning ! On delivery please note any damage on the delivery documentation before signing to accept the delivery.

 

SKU AUT-VFV-133-Grn05-X25
Brand AUTEX Vertiface
Shipping Weight 13.2500kg
Shipping Width 0.750m
Shipping Height 1.350m
Shipping Length 0.650m
Shipping Cubic 0.658125000m3
Unit Of Measure ea
Assembled Length 1.000m
Assembled Height 0.003m
Assembled Width 1.330m

RETAILER'S GUARANTEE - Vertiface®

RETAILER: Cycle of Knowledge Innovative Solutions Pty Ltd

PRODUCT NAME: Vertiface®

PRODUCT DESCRIPTION: 100% polyester needle punched, thermally bonded wallcovering

Vertiface® is manufactured by Autex Industries Ltd under ISO 9001 accredited Quality Management system.

All fabric should be inspected prior to installation. No warranty or other claim will be accepted where MANUFACTURER's installation specifications have not been followed, or unapproved cleaning agents or surface treatments have been used.

Where fabric is to be replaced, no charges for moving or replacing furniture, equipment or partitions will be accepted.

The above warranties are only applicable to the original purchaser of the goods and are only for the original application and installation.

Cycle of Knowledge Innovative Solutions Pty Ltd will not be liable for indirect, incidental or consequential damages of any kind, no matter what the cause.

This warranty states the entire liability of Cycle of Knowledge Innovative Solutions Pty Ltd with respect of the product warranted.

Product Replacement

Product that is faulty in workmanship or material will be repaired or replaced.

All damaged, faulty or incorrectly supplied product must be notified to Cycle of Knowledge Innovative Solutions Pty Ltd at the earliest time so they can advise the MANUFACTURER within seven (7) days of delivery.

WARRANTY RETURN PROCESS

Please contact Cycle of Knowledge Innovative Solutions Pty Ltd to discuss the issue you have encountered. You may then be asked to RETURN the item, DISCARD the item in favour of a replacement, or support FURTHER INVESTIGATION.

If requested, please RETURN your item to CYCLE OF KNOWLEDGE, P.O.BOX 5082 LABURNUM VIC 3130 AUSTRALIA. Please advise the tracking information as soon as possible. Once received the returned item will be assessed. You will then be advised whether the item will be replaced, repaired, or a refund issued.

On occassions it is uneconomic to return the item in question. Photos of the issues raised may be requested. Once received you may be asked to DISCARD the item or pass it to a local charity shop. By mutual agreement the item will be replaced, or a refund issued.

If the item is to be REPLACED the replacement will be posted asap and within five (5) business days.

If the item is to be REPAIRED every effort will be made to have the repaired item posted within twenty (20) business days. If this is to vary you will be advised of the reasons asap.

If the item is to be REFUNDED , and the item was paid for with PayPal, the refund will be issued within five (5) business days. If payment was received by another transfer method, such as bank deposit, the refund will be issued as a cheque to the shipping address recorded for the item, unless Cycle of Knowledge Innovative Solutions is otherwise advised, also within five (5) business days. Every effort will be made to issue the refund electronically before issuing a cheque.

Should the shipped product be installed and unable to be returned for assessment, photographs will be requested and a possible site visit arrange with the MANUFACTURER present. Every effort will be made to reach a mutually agreeable resolution to any issues you may have.

MANUFACTURER'S GUARANTEE - Vertiface®

MANUFACTURER: Autex Industries Pty Ltd

PRODUCT NAME: Vertiface®

PRODUCT DESCRIPTION: 100% polyester needle punched, thermally bonded wallcovering

The following is an extract from the Manufacturer's Guarantee sheet for Vertiface® as at June 16th 2017. You can find the detail at http://www.autex.com.au/acoustics/vertiface/

Vertiface® is manufactured by Autex Industries Ltd under ISO 9001 accredited Quality Management system.

This product is guaranteed to be free from manufacturing defects and carries a Manufacturer's Guarantee for a period no less than 10 years to meet all the performance properties stated within this guarantee.

The Manufacturer's Guarantee applies to all Quietspace® products faced with Vertiface® , and installed in accordance with the Manufacturer's installation instructions and related documents. These are available at www.autex.com.au .

Autex Industries Ltd warrants the aforementioned wall coverings be free from manufacturing defects.

All fabric should be inspected prior to installation. No warranty or other claim will be accepted where installation specifications have not been followed, or unapproved cleaning agents or surface treatments have been used.

Where fabric is to be replaced, no charges for moving or replacing furniture, equipment or partitions will be accepted.

The above warranties are only applicable to the original purchaser of the goods and are only for the original application and installation.

Autex Industries Ltd will not be liable for indirect, incidental or consequential damages of any kind, no matter what the cause.

This warranty states the entire liability of Autex Industries Ltd with respect of the product warranted.

Product Replacement

Product that is faulty in workmanship or material will be repaired or replaced.

All damaged, faulty or incorrectly supplied product must be notified to AUTEX Customer Services within seven (7) days of delivery. Please advise Cycle of Knowledge Innovative Solutions Pty Ltd at the earliest time so they can meet this requirement on your behalf.

Designated trademarks and brands are the property of their respective owners.

Copyright 2017 Cycle of Knowledge Innovative Solutions Pty Ltd. All Rights Reserved.

Be The First To Review This Product!

Help other Cycle of Knowledge Innovative Solutions Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category